ANYCUBIC Wash and Cure Machine 2.0, 2 in 1 UV Washing and Curing Station for LCD/DLP/SLA 3D Printer Models
550.00 ₾
About this item
- 2-in-1 Multifunctional Design: The machine has dual functions of cleaning and curing. It makes it easier to clean and cure the printed model. It is an excellent assistant for UV LCD 3D printers. A dual-purpose machine to save more space and keep the working area clean.
- Cleaning Mode: 1. Basket cleaning: remove the model and put it into the basket for direct cleaning; 2. Hanging cleaning: directly hang the print platform on the cleaning basket or cleaning stand to clean, reducing exposure to resin. Compatible with most LCD/DLP/SLA 3D printers such as Mars series, Photon series, etc. on the market. The max wash size of 4.72″x2.91″x6.49″ , 120x74x165mm
- Anti-UV Light Hood: One-piece molding hood, 99.95% blocking rate of 405nm wavelength UV light. The resin cleaning and curing station adopts sealed cleaning, which effectively prevents the cleaning agent from splashing and volatilization, and provides more security.
- UV Lamp Beads Upgrade Curing Mode: lamp beads add lenses, the light source intensity distribution is more uniform, and the surface of the model is smoother. With the 360° automatic rotating curing table, the bottom reflector is added, the bottom curing has no dead corners, so that the entire model is cured more thoroughly.
- Custom Time Adjustment: 1-60min time adjustable, knob custom cleaning and curing time. Each layer of the 3D printer model can be better cleaned and cured according to your DIY needs. After cleaning and curing the model, the performance is significantly improved, helping you create a perfect model.
- Description
- Brand
- Reviews (0)
Description
ANYCUBIC Wash and Cure Machine 2.0, 2 in 1 UV Washing and Curing Station for LCD/DLP/SLA 3D Printer Models, with Rotary Curing Turntable and Washing Bucket
Product Description
Product Description
ANYCUBIC Wash & Cure 2.0 machine with rotary curing turntable and washing bucket which has two practical functions for cleaning and curing.
2 in 1 wash and cure for UV resin curing and washing, perfect assistance for SLA LCD DLP printing and lab purpose.
Instructions for use
- The ambient temperature for best use is 0-40 ° C and the humidity is 20% -50%.
- The model is better after cleaning, air drying and then curing.
- If the cleaning and curing machine will not be used for a long time, please disconnect the power supply to extend the service life.
- After cleaning, remove the cleaning bucket and close the lid to prevent cleaning solution from getting onto the machine and causing short circuits.
ANYCUBIC UV WASH AND CURE 2.0 MACHINE
Technical specification
Functions: washing and curing
Control method: digital tube, LED indicator, control button
Rated power: 25W
The input voltage: AC 110V / 220V 50 / 60Hz
UV light: 405 nm
Time selection: 1-60min
Weight: 3.7 KG
Maximum cure size: 140mm (D) * 165mm (H)
Maximum wash volume: 120mm (L) * 74mm (W) * 165mm (H)
Machine size: 225mm (L) * 235mm (W) * 365mm (H)
Tips:
For models with a diameter of less than 30 mm, the recommended curing time is 2 minutes. If the surface structure of the model is more complicated, please extend the curing time accordingly.
The washing liquid can be alcohol, detergent and other liquids. Note: The washing liquid must not exceed the maximum size of the wash tank.
When the washing and curing machine is in curing mode, please do not take off the UV blocking top cover to avoid damage to human body from UV light sources.
|
|
|
|
|---|---|---|
UV Lamp Beads UpgradeUV lamp beads upgrade lenses are added to the UV lamp beads so that the UV light distribution is more even and the model surface is more even. The cover can block a 99.95% UV light source to prevent damage to the models from strong light |
Rotating Curing PlatformThe UV curing platform can be rotated 360 °. This means the model can be cured in all directions and cured evenly for the best effect as long as the cure button is pressed. You can also use the reflector to harden the top of the model. |
User Settings are More ConciseThe control mode is completed by the combination of digital tube, two-color LED indicator lamp and rotary knob. The washing and curing time can be set according to your wishes (time setting range: 1-60 min) and operation is very easy. |
|
|
|
|
|
|---|---|---|---|
UV-blocking Top CoverThe use of a transparent cover can block 99.95% of ultraviolet rays and has a safety protection effect. |
Closed CleaningThe washing model is more thorough, can completely prevent the detergent from splashing, and has a more safe and protective effect. |
Dual purpose: Wash and CureSupports model washing and curing, more productivity with less effort. Higher efficiency than other products. |
After Being Washed And CuredAfter cleaning and curing, the material properties of the resin are significantly improved. |
EN 
GE
Reviews
There are no reviews yet.